Samyang(三养)TRIREX PC 3030PJ是一种注塑成型,原料用,高流动,高粘度聚碳酸酯，比重是1.20g/cm³，熔流率（熔体流动速率）(300°C/1.2 kg)2g/10min，有着优异的机械特性，很好的尺寸稳定性及良好的电气特性，应用于汽车内饰,汽车外饰,杂货,电子电器。
以下是PC(聚碳酸酯)3030PJ/Samyang(三养)物性表参数
| PROPERTY | UNIT | ASTM METHOD | TYPICAL DATA |
|---|---|---|---|
| Physical | |||
| Specific Gravity | - | D792 | 1.20 |
| Water Absorption (24 hours at 23℃) | % | D570 | 0.3 |
| Melt Flow Rate (300℃, 1.2kg) | g/10min | D1238 | 2.0 |
| MECHANICAL | |||
| Tensile Strength at yield | kgf/㎠ | D638 | 731.0 |
| Tensile Elongation at break | % | D638 | 150.0 |
| Flexural Strength at yield | kgf/㎠ | D790 | 905.0 |
| Flexural Modulus | kgf/㎠ | D790 | 22800.0 |
| Izod Impact Strength, notched, 23℃ (1/8”) | kgf∙㎝/㎝ | D256 | 100.0 |
| THERMAL | |||
| HDT, 18.6 ㎏f/㎠ | ℃ | D648 | 135.0 |
| Coefficient of Linear Thermal Expansion | ㎜/㎜/℃ | D696 | 5~7 x 10-5 |
| ELECTRICAL | |||
| Volume Resistivity | Ω∙㎝ | D257 | 4E+16 |
| Dielectric Strength | kV/㎜ | D149 | 30.0 |
| ARC Resistance | sec | D495 | 120.0 |
| OTHERS | |||
| Mold Shrinkage (3mm thickness) | % | D955 | 0.5~0.7 |
温馨提示：本物性表参数提供者不承担任何法律责任，建议在选择材料前，就数据值与塑胶材料厂商进行验证。版权归原作者所有，如有侵权请立即与我们联系.
